PARAGON

The compact comfort module PARAGON is a constant flow product with adjuster knob for quick and easy control of a constant air flow from the slot openings. The PARAGON can also be integrated in the WISE system as a constant flow module with control of water valves.

The product is primarily designed for hotels and hospitals but can also be installed in offices.test

PARAGON provides high cooling/heating capacity through optimal utilisation of its cooling/heating coil already while the air pressure and airflows are low. At the same time, the installation height of the product is kept at an absolute minimum which enables maximum room height in e.g. the entrance to a hotel room.

The casing is manufactured in galvanized sheet steel (zinc plated) Grills are in prepainted sheet steel and aluminium RAL 9003, Coil in copper and aluminium.

Standard colour:

• RAL 9003 White (Signal white), gloss ratio 30 ± 6%

Alternative standard colours:

• RAL 7037 Grey (Dusty gray), gloss ratio 30-40%)
• RAL 9010 White (Pure white), gloss ratio 30-40%)
• RAL 9005 Black (Jet black), gloss ratio 30-40%)
• RAL 9006 Silver (White aluminium), gloss ratio 70-80%)
• RAL 9007 Grey (Grey aluminium), gloss ratio 70-80%)
• Other colours available on request

The PARAGON has two holes on each short side for hanging and is mounted with a threaded rod in each hole. For installation use the assembly fitting containing threaded rods, ceiling brackets and nuts to all four mounting brackets. Threaded rod length from 200 mm.

In the event of large distances between ceiling and unit, double threaded rods with thread locks are used.

Assembly fittings SYST MS M8 (Figure 21) are ordered separately.