ADAPT Parasol EX

By styling straight lines and sharp edges, Swegon architects have created a timeless design that fits in well in most room decor together with other installations in the room.

4-way air distribution in combination with Swegon’s ADC^II (Anti Draught Control), creates a maximised mixing zone and minimises the risk of draught issues. The ADAPT Parasol EX is also designed for distributing air slightly upward. This gives the chilled air more space to mix with the room air before it reaches the occupied zone and in doing so providing the occupants with a comfortable temperature.

Installation with or without connection casing

ADAPT Parasol EX is supplied as standard with a cover plate that covers a large part of the opening except for the water and air connections. If you also wish to cover the pipes and air duct to give a uniform design, there is a connection casing available that is ordered as an extra accessory.

Flexibility

The easily adjustable nozzles in combination with Swegon’s ADC^II offer maximum flexibility if changes in the room layout become necessary. All the sides can be set independently of one another so that the comfort module can distribute more or less air and simultaneously discharge air in whatever direction desired in the room.

The casing is manufactured in galvanized sheet steel (zinc plated). Face plate is in prepainted sheet steel RAL 9003, Coil in copper and aluminium.

Standard colour:

• RAL 9003 Standard colour, white, gloss ratio 30 ± 6%

Alternative standard colours:

• RAL 7037 Grey (Grey Dusty shade), gloss ratio 30-40%)
• RAL 9010 White (White), gloss ratio 30-40%)
• RAL 9005 Black (Black Jet), gloss ratio 30-40%)
• RAL 9006 White (White Aluminium), gloss ratio 70-80%)
• RAL 9007 Grey (Grey Aluminium), gloss ratio 70-80%)

Suspension

ADAPT Parasol EX consists of three parts:

• A = Base module
• B = Design module with associated cover plate (B2)
• C = Face plate

The base module has four brackets for suspension. No extra assembly parts are required for surface mounting except for products with a Ø125 connection, and then the enclosed spacers are used when mounting.

A threaded rod in each mounting bracket is used for suspended installation (see figure). Threaded drop rods and assembly fitting SYST MS M8 (see figure) are ordered separately.

ADAPT Parasol EX is supplied as standard with a cover plate that covers a large part of the opening except for the water and air connections. If you also wish to cover the pipes and air duct to give a uniform design, there is a connection casing available that is ordered as an extra accessory.