PARAGON Wall VAV

PARAGON Wall VAV is a demand-controlled comfort module with integrated regulation which, with its mounted control equipment, brings air flow and cooling and heating under demand-control for the best energy efficiency and comfort. The product has a unique slot opening that means we can always guarantee the right air flow into the room and this with our functional controller with many I/O possibilities. This is a plug & play product for quick and easy installation. The compact comfort module is primarily designed for offices.

The casing is manufactured in galvanized sheet steel (zinc plated) Grill is in prepainted sheet steel RAL 9003, Coil in copper and aluminium.

Standard colour:

• RAL 9003 White (Signal white), gloss ratio 30 ± 6%

Alternative standard colours:

• RAL 7037 Grey (Dusty gray), gloss ratio 30-40%)
• RAL 9010 White (Pure white), gloss ratio 30-40%)
• RAL 9005 Black (Jet black), gloss ratio 30-40%)
• RAL 9006 Silver (White aluminium), gloss ratio 70-80%)
• RAL 9007 Grey (Grey aluminium), gloss ratio 70-80%)
• Other colours available on request

The PARAGON Wall VAV has two holes on each short side for suspension and is mounted with a threaded rod in each hole.

For installation use the assembly fitting containing threaded rods, ceiling brackets, and nuts for all four mounting brackets.

Threaded rod length from 200 mm. In the event of large distances between ceiling and unit, double threaded rods with thread locks are used. Assembly fittings SYST MS M8 are ordered separately.

The work involving the casing can begin once PARAGON Wall VAV has been fully installed. The product is designed to be placed at the rear of the room adjacent to the corridor and installed in the space above the suspended ceiling in the corridor.

To simplify the work, cut-out dimensions are given in separate installation instructions at www.swegon.com.