CRM

Measurement/control damper

Type-approved method of measurement
Pressure class A
Air tightness class 0 or 4
Leakage factor for housing according to tightness class C
One K-factor per size
Manually adjustable blade (standard)
With provision for motorised control
Quick connection enables simple access for cleaning (accessory)

Technical description

Design

Circular airflow measurement and commissioning damper. The CRM consists of a duct section with a damper and measuring device. The connections are fitted with rubber seal ring. The damper has a lockable knob for manual adjustment and indicators for open and closed damper blade position are stamped in the damper’s exterior surface.

Inside the damper, there is a measurement unit and a damper blade. The damper blade is available as a solid blade with rubber gasket (Ductwork leakage class 4), or as a perforated blade without rubber gasket (Ductwork leakage class 0). Ductwork leakage classification according to SS-EN1751 och VVS AMA 98. Tightness Classification according to EN 1751 and VVS AMA Pressure Class A with 1000 Pa as the highest pressure difference over damper blade in closed position. Tightness class C on the housing and tightness class 0 for closed damper.

When motorised control is selected, the damper knob shelf is replaced by a larger actuator support shelf. Standard supporting shelves are 80 mm high to allow possible duct insulation.

Material and surface treatment

Filter

Include Accessory documents

Document	Article	Document type	Date
Controllable unit of measurement (pdf 904.4kB)	CRMc	Technical catalogue	21/04/2023
Installation, Commissioning, Maintenance (pdf 581.69kB)	CRMc	IOM Manual	28/04/2023
Environmental Product Declaration (pdf 434.34kB)	CRMc, CRPc, CRTc	Quality	21/08/2024

Whilst we have made every effort to ensure information on this website is up to date and accurate, the technical specification and availability of products/services listed on this website may vary market to market and are subject to change without notice. Please contact your regional representative or visit your local website for further details.